Shamrockez
3rd June 2008, 15:04
At least I think that's what they're called :o
This is based on the 1.9 non PD, ALH engine. I'm not sure if PDs are the same, I'll have a looksie at Herbie when he arrives.
Anyways - usual safety precautions -gloves, goggles etc...
Remove the engine cover and find the pipes. Mine were looking a bit dodgy and with the price of fuel, I didn't want to be loosing any of it!
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0088yu.jpg
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0089yu.jpg
Get some more pipe off any motorfactor - should only cost a few quid too :)
Cut them to the same lengths as the old ones. To remove the old ones, just pull! To fit the new ones, push them on.
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0090yu.jpg
Then see how scary the old ones look!
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0092yu.jpg
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0094yu.jpg
Very easy to do, and only took a few minutes :)
This is based on the 1.9 non PD, ALH engine. I'm not sure if PDs are the same, I'll have a looksie at Herbie when he arrives.
Anyways - usual safety precautions -gloves, goggles etc...
Remove the engine cover and find the pipes. Mine were looking a bit dodgy and with the price of fuel, I didn't want to be loosing any of it!
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0088yu.jpg
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0089yu.jpg
Get some more pipe off any motorfactor - should only cost a few quid too :)
Cut them to the same lengths as the old ones. To remove the old ones, just pull! To fit the new ones, push them on.
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0090yu.jpg
Then see how scary the old ones look!
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0092yu.jpg
http://i14.photobucket.com/albums/a309/Shamrockez7/How%20Tos/PIC_0094yu.jpg
Very easy to do, and only took a few minutes :)