Shamrockez
16th December 2007, 20:50
Thanks to Ian C for this one.
note , if your windows close when you lock the car , either do it with door open , or have a "beautiful assistant " sat in car .
2 ways of doing it ....................
To program the remote functions on a new key, get in your car with the car off and the driver side window rolled down.
insert the new key into the ignition
insert your vallet key in the driver side door lock (outside the car)
turn the vallet key towards lock and hold it there
while it is held towards lock, press the unlock button on your new remote for
2 seconds.
let go
press it again for 2 seconds let go and you should hear an alarm honk or something like that.
---------------------------------------------------------------------------------------
If you have two (or more) working keys of your car, then you also the option of doing it without using a VAG-COM. Just do the following:
1. Insert any one of the working keys into the ignition lock and switch to the ON position without starting the engine.
2. Using any of the remaining keys, manually lock your car from the outside.
3. Press either LOCK or UNLOCK on the remote (to be programmed) once, then wait 2 seconds.
4. Press either button again once.
5. Switch off ignition and remove key from ignition.
6. You should hear a beep as a confirmation that the programming is completed
note , if your windows close when you lock the car , either do it with door open , or have a "beautiful assistant " sat in car .
2 ways of doing it ....................
To program the remote functions on a new key, get in your car with the car off and the driver side window rolled down.
insert the new key into the ignition
insert your vallet key in the driver side door lock (outside the car)
turn the vallet key towards lock and hold it there
while it is held towards lock, press the unlock button on your new remote for
2 seconds.
let go
press it again for 2 seconds let go and you should hear an alarm honk or something like that.
---------------------------------------------------------------------------------------
If you have two (or more) working keys of your car, then you also the option of doing it without using a VAG-COM. Just do the following:
1. Insert any one of the working keys into the ignition lock and switch to the ON position without starting the engine.
2. Using any of the remaining keys, manually lock your car from the outside.
3. Press either LOCK or UNLOCK on the remote (to be programmed) once, then wait 2 seconds.
4. Press either button again once.
5. Switch off ignition and remove key from ignition.
6. You should hear a beep as a confirmation that the programming is completed